1050 aluminum foil usually refers to aluminum foil with 99.5% aluminum element content. Since there is no need to add other chemical elements, 1050 aluminum foil has a simple production process and is relatively cheap compared to alloy aluminum sheets, making it a widely used aluminum foil.
1060 aluminum foil, containing 99.6% aluminum is also known as pure aluminum foil, has high plasticity, corrosion resistance, electrical and thermal conductivity and other characteristics, widely used in the electronics industry.
1070 aluminum foil, high plasticity, corrosion resistance, good electrical and thermal conductivity, suitable for aluminum foil made into gaskets and capacitors.
1100 aluminum foil has good formability, corrosion resistance, thermal conductivity, and can be used for food packaging, aluminum foil gaskets, electrolytic capacitors, aluminum-plastic composite panels, phenolic composite air ducts, decorative foils, etc.
1235 aluminum foil has an aluminum content of at least 99.35% and is widely used in wire and cable, tape, and battery foil for its good rust resistance, formability, and solubility. The market position is second only to 8011 aluminum foil.
3003-H18 aluminum foil, 3003-O state aluminum foil, 3003-H24 aluminum foil base material, with multiple advantages such as food grade, clean oil removal, less holes, good product board shape, no deformation in cutting, gluing not easy to fall off
3004 aluminum foil has high hardness, good load-bearing, and better stamping effect than 3003 aluminum foil, which can be applied to aluminum foil lunch boxes with hygienic products.
5052 aluminum foil can be used for aluminum honeycomb cores and acoustic materials, etc. It is generally used in high-end fields.
8006 aluminum foil a special container foil product that can be used to produce wrinkle-free lunch boxes with wrinkle-free edges and a flat, smooth appearance after stamping and molding.
The difference between 8006 lunch box material aluminum foil and 3003 aluminum foil and 8011 aluminum foil:
8006 lunch box material aluminum foil has high strength and is hot rolled, 3003 aluminum foil and 8011 aluminum foil have low strength and are cast and tied.
The elongation and cup convexity values of 8006 aluminum foil are higher than those of 8011 and 3003 lunch box material aluminum foil. 8006 container foil has a tensile strength 10 MPa higher than 8011 aluminum foil and slightly lower than 3003 aluminum foil.
8011 alloy is added Al-Fe-Si elements, more than 1% of the total alloying elements in its alloy performance correspondingly has a higher advantage. 8011 is commonly used to do aluminum foil, its tensile and yield is better than pure aluminum foil, in aluminum foil is more widely used